Tools & Waxes

V50 VIOLET HARDWAX 0C, 43G New fallen snow 0°C (32°F). Old fine grained snow -1°C to -3°C (30°F to 27°F). For many years a secret weapon in the wax-box of World Cup Servicemen. To be used when the snow is in a stage going from cold to wet, around freezing (32°F). The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

V55 RED SPECIAL HARDWAX 0/+1C, 43G New fallen snow 0°C to +1°C (32°F to 34°F). Old fine grained snow 0°C to -2°C (32°F to 28°F). For moist new snow up to +1°C (34°F) and down to -2°C (28°F) in older more transformed granular snow. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

V60 RED/SILVER HARDWAX 0/+3C, 43G New fallen snow 0°C to +3°C (32°F to 37°F). Old fine grained snow +1°C to -1°C (34°F to 30°F). For wet new snow up +3°C (38°F) and down to -1°C (30°F) in older more transformed granular snow. Apply thicker the warmer it is to secure grip. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

V05 POLAR HARDWAX -12/-25C, 43G New fallen snow -12°C to -25°C (10°F to -12°F). Old fine grained snow -15°C to -30°C (5°F to -22°F). As the name indicates, this is hardwax made for the coldest conditions. Frequently used in the polar regions of Europe and North America. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

Hydrocarbon wax powder rated for the very coldest conditions and excellent for preventing base damage to skis and snowboards from abrasive snow. 30 grams. Sprinkle along the base near the edges (especially under the boot/binding area). Iron in, cool and scrape/brush. Apply race wax.

T75110NO NORTH WAXING IRON 110V The most important function of a waxing iron is temperature control! Variable temperature function for all wax types and an ergonomic shaped handle for easy movement along the base. Don’t use Mom’s iron on your valuable piece of equipment!

T1706B P-STICK TRANSP,6MM,10PCS,40G Polysticks for base repair. Easy to work with. Ø 6 mm. One package: 10 pcs.

P20G XC TOURPACK STANDARD Practical zippered wax package for recreation and touring. For those who want to do it simple. Contains: V40 Blue Extra, V45 Violet Special, V60 Red/Silver hardwaxes, synthetic cork and a groove scraper. Great gift pack!

T410 PLEXI SHARPENER WC LARGE World Cup sharpening tool for plexi scrapers with 100 mm high quality file. Two walls for stable position makes it easy to sharpen precise.

PS5 TURQUOISE, -10°C/-18°C, 180G/60G The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) Replaces the CH5X. ACTIVITIES Alpine Alpine Biathlon Biathlon CrossCountry Cross Country CrossCountryRacing Cross Country Racing Randonee Randonée Snowboard Snowboard

PS6 BLUE, -6°C/-12°C, 60G/ 180G PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as race wax alone or as a base for top coats. Recommended iron temp: 145°C (293°F). Replaces the CH6X

PS7 VIOLET, -2°C/-8°C, 180G/ 60G PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). Replaces the CH7X. ACTIVITIES Alpine Alpine Biathlon Biathlon CrossCountry Cross Country CrossCountryRacing Cross Country Racing Randonee Randonée Snowboard Snowboard

PS8 RED, -4°C/+4°C, 60G/ 180G PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). Replaces the CH8X. ACTIVITIES Alpine Alpine Biathlon Biathlon CrossCountry Cross Country CrossCountryRacing Cross Country Racing Randonee Randonée Snowboard Snowboard

T69 ROTO BRUSH BOX, EMPTY Empty Roto Brush Box. Can fit: 4 pcs. 100 mm brushes, handle, shaft 100 mm/120 mm/200 mm. Can also fit: 2 pcs. 100 mm brushes, 2 pcs. 140 mm brushes, handle, shaft 100 mm/120 mm/200 mm.

T16M ROTOBRUSH HORSEHAIR, 100MM The initial brush on all waxes. Used on regular waxes and Cera F. (Do not use the same brush on regular wax and Cera F.) 100 mm wide.

T17W ROTOBRUSH NYLON, 100MM Finish and polish brush for paraffin wax and Cera F. 100 mm wide.

T87 GROOVE AND ALL PURPOSE SCRAPER Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.

Base and groove scraper. Used for klister application. Or to remove wax or klister from the base before cleaning with Base Cleaner.

SB34D PLEXI SCRAPER 4MM SNOWBOARD Sharp and effective plexi scraper for snowboards. 4 mm.

T408 SHARPENER PLEXI, 40MM Sharpener for plexi scrapers with short, sharp file, 40 mm. Can be mounted on the wall or waxing table. It's important to have sharp scrapers when prepping.

TA101N SIDEWALL CUTTER Sidewall Cutter. For gradually removing plastic side-edges on skis and snowboards to expose more of the steel edges. Makes filing easier.

T0149-90N POWER PRO VISE 155MM For wide skis up to 155 mm. Centerpiece is 30 mm further out from table compared to the other vises for better alignment with supports. Supports in front and back with screw fixation. Perfect for jumping skis and freeride skis.

TAA200N DIAMOND STONE, COARSE 100MM Coarse 200 grit. Deburring and maintenance stone. One of two stones that can do it all in the diamond category. Works great for maintaining sharpness and smoothness. 100 mm.

TAA600N DIAMOND STONE, FINE100MM Fine 600 grit. First diamond stone when you have smooth, clean edge to start honing and polishing the set edge. Great grit for finishing tech skis. 100 mm.

Perfect staging area for waxing. Holds up to 4 pairs of Nordic skis. Clamps securely to Swix Wax Tables and uses telescopic lower legs to brace against floor.

T330 SANDPAPER, 5 PCS #100 Medium sandpaper. 5 pcs. pr. package. Silicon carbide abrasives. This very hard and sharp abrasive is best suited for working on bases and edges. For rubbing the kick zone on cross-country skis and for polishing alpine ski bases after polystick repair.

T350 SANDPAPER, 5 PCS #180 Fine sandpaper. 5 pcs. per package. Silicon carbide abrasives. This very hard and sharp abrasive is best suited for working on bases and edges. For rubbing the kick zone on cross-country skis. Kan also be used to polish plastic sidewalls on alpine skis.

T149-20 VISE 3-PARTS, 20MM FIXATION Three pcs. vise with jaw fixation. 20 mm wide jaws. Opens from 35 mm to 80 mm. 60 and 90 degrees side edge working position. Light weight and compact.

T144 VISE 2 POINT FRICTION For freeride and alpine. Two point economy vise based upon rubber friction. 60 and 90 degree side edge working position. Light weight and compact.

T149-50UA UNIVERSAL APAPTER Universal adapter for World Cup Ski Vise T0149-50. Converts your alpine vise into a snowboard or cross country vise. Made of solid plastic and quality rubber.