Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Whether you're going on a cross country family road trip or heading out for a bike-friendly weekend the BackRoad is your take-it-easy answer. With increased bike spacing, the BackRoad makes it easy to pack more bikes with a lot less hassle. Cradles and pads provide a snug and protected fit, while fully removable ZipStrips make loading a breeze. An SKS bike locking system is included to give you some peace of mind on your travels. Product Details - 7" spacing between bikes for easier loading - Soft cradle pads for added bike protection - Side to side cradle rotation for a better bike fit - Anti-sway cradles eliminate bike-to-bike contact - Mast tilts down for easy hatch access - Integrated SKS locking cable locks bikes to rack - ZipStrips secure bikes to the rack and are fully removable - Arms fold down when not in use - 37.5lb weight maximum per bike - Fits 1.25" and 2" hitch receiver - Integrated Yakima bottle opener - Carries up to 2 bikes. Also available in a 4 bike capacity - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Weight: 31.21 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
$244.99 - $274.99
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Now the entire posse only needs to mount up on one vehicle. The BigStack lets you carry up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. Folds down for better aerodynamics when not in use. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds down when not in use for better aerodynamics and easier access to your garage - Universal built-in hardware fits round, square, factory and aerodynamic crossbars right out of the box. Optimized for aerodynamic bars. - Top-of-the-line hull guard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - AnchorHead tie down feature makes it easy to manage straps with multiple kayaks - Heavy-Duty Straps and Bow and Stern Tie-Downs included (HoodAnchor, sold separately, is required for vehicles with no attachment points for Bow and Stern Tie-Downs) - Premium heavy-duty straps with coated metal buckles protect boat and vehicle - Great for carrying multiple whitewater boats - Lockable with SKS Lock Cores (sold separately) - Minimum crossbar spreads of 24" or more Product Specs: - Weight: 7.20 lbs. - Dimensions: L 6.00 in x W 5.00 in x H 22.00 in - Minimum Crossbar Spread 24.00in - Limited Lifetime Warranty
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
$99.99 - $129.99
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”
Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear–from skis and snowboards to boats and surfboards. It installs in minutes–just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope
Everyone at the river will envy your ingenuity and thrifty selection of the saddle-style rooftop EvenKeel. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4. - Includes 4 saddles per package - Fits Yakima round, square, factory, and aerodynamic bars - Heavy-Duty Straps and Bow and Stern Tie-Downs included (HoodAnchor, sold separately, is required for vehicles with no attachment points for Bow and Stern Tie-Downs) - Supports one boat up to 80 lbs - Minimum crossbar spread of 24" or more Product Specs: - Weight: 5.00 lbs. - Dimensions: L 11.00 in x W 8.00 in x H 8.50 in - Minimum Crossbar Spread 24.00in - Limited Lifetime Warranty
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
NEW! Perfect for family weekends or ditching work on a powder day, FreshTrack 4 is made for loading up and finding first tracks. Wide enough for a couple of boards or four pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for fresh powder and blue groomers. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries four pairs of skis up to 120mm wide at the tip or two snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 7.94 lbs - Dimensions: L 25.25" x W 5.75" x H 7.25" Installation Details - Some assembly required - Tool-Free Install - 25 minute install
NEW! Blue groomers and fresh powder, the FreshTrack 6 is the perfect mount for loading the crew and finding first tracks. Wide enough for four boards or six pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for quick getaways and dawn patrol starts. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries six pairs of skis up to 120mm wide at the tip - or four snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 9.90 lbs - Dimensions: L 35.00" x W 5.75" x H 7.25" Installation Details - Some Assembly Required - Tool-Free Install - 25 Minute Install
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of. - Fits Yakima round, square, factory or aerodynamic crossbars - Zero contact with frame; carbon fiber and custom paint jobs are protected - Accommodates disc brakes, thru axles, and full suspension bikes - Holds bike upright while you secure the bike to the mount - Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike) - No tools or assembly required - Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7" - SKS Locks sold separately - 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 13.00 lbs. - Dimensions: L 56.00 in x W 7.00 in x H 7.50 in - Minimum Crossbar Spread 16.00in - Maximum Crossbar Spread 42.00in - Limited Lifetime Warranty
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
Our premium tilt-down hitch rack comes fully assembled out of the box. Installation is a breeze with the AutoPin and locking SpeedKnob. New ZipStrips make loading and securing bikes simpler than ever. Need to access your vehicle? Simply tilt rack down with the conveniently located UpperHand lever. Holds up to five bikes. - Fully assembled out of the box - Tool-free installation with locking SpeedKnob - AutoPin automatically positions and secures the rack into the hitch receiver - Fully padded arms for the ultimate in bike protection - UpperHand lever tilts rack down for vehicle access and folds it flat for easy storage - Arms fold down when not in use - Zero-hassle ZipStrips quickly secure bike to rack - SKS Locks included; locks rack and bike mounts - Fits both 1.25" and 2" receiver - Carries up to 5 bikes - Max 40 lbs per bike with a total max of 150 lbs - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. Product Specs: - Weight: 42.80 lbs. - Dimensions: L 44.25 in x W 12.50 in x H 16.50 in - Limited Lifetime Warranty
$179.99 - $199.99
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in
A strap rack that hits the sweet spot where functionality, durability, simplicity and good looks come together, the HalfBack 3 is designed for riders who like to grab their bikes and go. Install is simple, loading and unloading is a piece of cake, bikes ride securely, and a built-in bottle opener opens bottles. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Yakima signature bottle opener lets you enjoy a post-ride cold one - Number of Bikes: 3 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 29.00” x H 22.00”
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Super simple and built to last, the new Yakima HangOut 2 offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Arms fold for compact storage - Number of Bikes: 2 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”
Super simple and built to last, the new HangOut 3offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Available in two or three bike carrying capacities - Arms fold for compact storage - Number of Bikes: 3 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”
All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration. PRODUCT DETAILS - Transports up to 4 flat bar Bikes or 3 drop bar bikes using minimal space - Securely supports most road, mountain, kids, and cruiser bikes by the handlebar - Fully padded cradles protect your handlebars, including carbon bars - Rotating rear wheel cup fits a wide range of wheelbases up to 50" - Accommodates bikes up to 37.5 lbs. each - Holds 20"-29" tires up to 5" wide - Add your own bike lock to the integrated lock loop for greater bike security - Foot-operated tilt mechanism makes it easy to access the rear of the vehicle. - Dual cradle retention stabilizes and protects bikes from one another. - HitchLock included - Built-in bottle opener—cheers! - Fits 2" hitch receivers only - Compatible with the Yakima BackSwing and StraightShot (HangTight 4 only) - Not compatible with aero handlebars, clip-on aero bars, or handlebars larger than 35mm in diameter - Transport dual-crown fork bikes with the HangTight DH Cradle accessories (sold Seperatly) PRODUCT SPECS - Weight: 73.00 lbs.
Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks. - New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs - Sleek, low-profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 18.00 lbs. - Dimensions: L 56.00 in x W 9.50 in x H 4.50 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Our new premium fork mount, the low-profile HighSpeed, is streamlined, strong, and versatile. It easily transports mountain, road, and fat-tire bikes and fits both quick release and thru axles. Bikes are secured using the new and easy-to-use TorqueRight knob for a precise and strong hold. The sleek and stylish HighSpeed tray is designed for maximum hatch clearance. Universal mounting hardware fits most roof racks. - Securely carries a variety of bikes including road, mountain and up to 5" fat-tire bikes - Fits Yakima round, square, factory, or aerodynamic bars - Seamlessly carries both quick-release (9mm) and thru-axle bikes (12mm, 15mm, 20mm) - New TorqueRight knob quickly and easily secures the bike with precision. - Sleek, low-profile tray minimizes hatch interference and accommodates tires up to 5" wide - Tool-free, universal mounting hardware fits most roof racks - Carry quick-=release 9 x 135mm fat bike with the Optional Fat Bike Adapter Kit (sold separately) - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks to the TailWhip cable and crossbar attachment to secure your bike and mount to your roof rack. For additional security add a lock to the TorqueRight knob. (SKS sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 9.60 lbs. - Dimensions: L 54.50 in x W 9.00 in x H 4.75 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Page 1 of 14 Next page