Tools & Waxes
TA520 BASE FILE GUIDE, 0,5 TO 2,0° Adjustable file holder for racing. For side-edge beveling from 0.5°to 2.0°. Easy to adjust the angle. For skiers and servicemen. Quality construction.
VG35 BASE BINDER GREEN, 45G A durable basewax for all hard waxes in colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.
BASE CLEANER LIQUID 500 ML Lightly scented liquid base cleaner. Remove as much was or klister as possible with a scraper before the base is cleaned and wiped off with Fiberlene paper. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. 17.5 fl. oz. DANGER H-sentence number: H226, H304, H336, H412, EUH066 H-sentence: Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.
I61C BASE CLEANER AEROSOL 70 ML Aerosol spray on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 2.4 fl. oz. DANGER H-sentence number: H222, H229, H336, H412, EUH066 H-sentence: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking.
I91C BASE CLEANER SET W./I62C,T0151 Base cleaner set containing: 150 ml aerosol Base Cleaner and 20 m Fiberlene Cleaning Towel. Lightly scented. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper.
VG30 BASE WAX, BLUE, 43G To be used as first layer for all hard waxes in new fallen snow, transformed fine grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.
T160B BRUSH RECT., FINE BLUE NYLON Blue nylon brush. Ø 0.12 mm. A fine soft nylon brush for polishing all waxes. 5 to 10 strokes.
BP99 BASE PREP SOFT, 180G A soft wax with low melting point. Recommended as the first wax on all new skis to make the base accustomed to hot irons. BP99 is also recommended for skis or boards in the “Hot Box”. The temperature in the Hot Box should never be higher than 55°C/130°F. Higher temps than 55°C in the hot box can cause delamination of the base. Fluor Free Base prep waxes to be used as prep wax before applying the wax of the day. DETAILS For initial waxing Low melting point and easy to work with
BP77 HARD, 180 G A harder Baseprep for new DH, GS and SL skis used for all conditions. Can also be used for glacier training. The wax is easy to work with and gives the ski bases a nice looking finish. Base prep waxes to be used as prep wax before applying the wax of the day. DETAILS A hard base prep wax Great for alpine ski
BP88 BASE PREP MEDIUM, 180G For normal winter conditions, 0°C to -10°C. The All Round Base Prep wax for most skis/boards. Used on new skis and as travel wax. Fluor Free Base prep waxes to be used as prep wax before applying the wax of the day. DETAILS Allround base prep wax For typical winter conditions
T162O BRUSH OVAL, MEDIUM BRONZE Medium bronze brush. Ø 0.15 mm. First brush used after scraping. For brushing glide wax out of the structure. 10 strokes.
T162SB BRUSH SMALL RECT.,M,BRONZE Practical pocket sized bronze brush. First brush used after scraping. For brushing glide wax out of the structure.
The Swix Wild Boar Brush is an important brush for any racer using Cera F Wax. The Wild Boar Brush is recommended for use as the second brush for Cera F wax applications. The Wild Boar can be used in place of a Horsehair brush, and run 5 to 10 strokes tip to tail after running the Stiff Black Nylon Brush. Because of the differences in wax properties it is highly recommended that brushes used for Cera F are kept as strictly Cera F brushes. Recommended by Swix as the Second Brush on Cera F Applications: 5 to 10 strokes 0.15 mm Fibers
T19S ROTOBRUSH STEEL, 100MM Fine steel brush to clean base structures before waxing. Can be used as second brush on wax after T16M Horsehair brush. We recommend to deburr the steel lightly with sandpaper #100 before using it the first time on skis. 100 mm wide.
Temperature range from -12°C to -32°C (12°F to -26°F). Recommended iron temp.: 150°C (300°F). CH03X is a special synthetic hydrocarbon powder wax to add to other waxes to increase their durability and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle CH03X over the wax. Even a generous amount will not effect glide. Then iron the CH03X powder into the wax layer. Allow cooling, then scrape and brush away the excess. CH3X Cold Powder, 30g Fluor Free Powder wax for cold condtions. Suits condtions from -12°C to -32°C. For touring and racing skiers. Great for training and competition. DETAILS Extremely durable Perfect on cold man-made snow
Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt, for application of Cera F.
T12 SYNTHETIC RACING CORK W/HD This synthetic cork has a higher density than a regular synthetic cork. For racing.
TA200E DIAM. 100MM, COARSE,ECO. Coarse Diamond Stone with plastic support. Red. 100 mm. Deburring and maintenance stone. Works great for maintaining sharpness and smoothness. Good price.
TA400E DIAMOND MED. ECONOMY,100M Medium Diamond Stone with plastic support. Yellow. 100 mm. Maintains a smooth edge. This is your 2nd “must have” stone. Good price.
F4-100C GLIDEWAX LIQUID 100ML F4 Universal All Temperature Liquid wax. For all skis and snowboards. All snow conditions. With foam applicator and felt polisher. Handy ergonomic pocket size. Apply, polish and go! DANGER H-sentence number: H225, H319, H336 H-sentence: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
F4-60 GLIDEWAX 60G W/CORK F4 Universal All Temperature Solid rub on wax. For skis and snowboards. All snow conditions. Economic and long lasting. No solvents. Handy pocket size with cork on the back. Rub on, cork in and go! Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.
F4-60W GLIDEWAX WARM 60G W/CORK F4 Warm Premium Solid with cork on the back. -4°C/25°F and warmer. Rub on performance wax, a natural step up for the F4 consumer that require the little extra. For all skis and snowboards. For all snow conditions. Economic and long lasting. No solvents. Handy pocket size. Rub on, cork in and go! Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.
F4 Warm Premium Liquid Performance Wax. -4 ° C / 25 ° F and warmer. For all skis and snowboards. For all snow conditions. A natural step for the F4 consumer who requires a little more. Better glide and more durable. Based on HVC technology. With foam applicator and felt polisher. Practical ergonomic pocket. Based on Future Cera's raw materials, which provide high quality and an environmentally friendly profile. Danger: Highly flammable liquid and vapours. Causes serious eye irritation. May cause drowsiness or dizziness.
Durable cleaning paper. Quality paper for all-round use.
T106X FILE CHROM 2-CUT, 20CM 16TPCM 8"/20 cm. 16 tpcm. 2nd cut. Chromed all purpose file. Best all round file produced by Swix. Side beveling, base beveling set up before diamond work. Durable beyond all other files offered.
T107X FILE CHROM BASTARD, 20CM 13TP 8"/20 cm. 13 tpcm. Chromed Bastard removal/setup file. Best file for setting side angle. Non-tang files offer a truer, flatter file for exact degree application. Best file for initial side bevel.
TA22 FILE CLAMP W/SPRING Clamp with spring to fix file to holder. Fits all Swix filing tools. Strong construction.
T104X FILE CHROM F-CUT, 15CM 20TPCM 6"/15 cm. 20 tpcm, fine cut. Chromed Finishing File, shorter in length, increased TPCm to smooth out all striations left by 2nd cut file. Most durable, best cutting 6” file Swix offers.
T994 HARD RUBBER STONE Hard gummy, brown. For polishing and light to medium edge clean up. Can be used after filing to remove micro burrs.
T77 WAXING IRON ECONOMY, 110V 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).
Page 1 of 4 Next page